BTCC » 26 October 2006
VXR: Producing the goods.
In the latest column for VXR, special projects manager at Triple Eight, Raphael Caille talks about the new Astra VXR Sprint R to be used in the BARC Dunlop Sport Maxx Cup and the challenges of developing an engine for the BTCC.
The Astra VXR Sprint R is a car that we have developed specifically for the new BARC Dunlop Sport Maxx cup. It is based on a proper race shell, similar to the one we use in the BTCC, but the rest of the car is much lower in terms of specification than the BTCC car – it is much closer to a road car.
This is how the car will be made at Triple Eight and how we want to run it is that we will build cars and sell them to customers who will go out in the series and run them themselves, we aren't getting involved with actually running the cars. We have full support from Vauxhall for this and perhaps the most important thing is that Vauxhall want us to use the production cup as a stepping stone before the BTCC for young drivers. What we are going to do is offer a test drive in a BTCC car at the end of the production cup to the best performer using the Astra VXR Sprint R.
Looking at the two cars, the outside shape is probably the thing that is the most similar and the roll cage is also quite similar. However, the rest of it is different. I guess the best way of looking at how different they are is to consider than one is four times more expensive than the other, which shows how close to a road car the Sprint R actually is.
Putting together a production car like the Sprint R requires a completely different approach to a proper race car. When we design our BTCC car, we are obliged to take some road car parts, like the shell for example or the engine block, but from that point onwards we only thinking about the lightest and stiffest parts so we can get the most performance out of the car. When we do a production car, we take a road car – which is basically a donor car – and transfer the components onto a race shell. Then we add some race suspension. But as the title says, the whole idea is to keep it as close to a road car as possible.
We have had a lot of interest in the car but we haven't had any firm orders, which is because everyone was waiting for Dunlop to formally announce the new series. Now that has been done, we are expecting the orders to start coming in before Christmas.
With the BTCC, I am involved with the engine side of the project at Triple Eight. The project is one where we sub-contract about 70 per cent to Sodemo who are based in Magny-Cours in France. The rest of the project is done at Triple Eight and it is probably quite rare to have an engine programme that is so integrated into the team in touring cars. Both drawing offices at Triple Eight and at Sodemo have a permanent link and there are parts made North of the Channel and South of the Channel.
Everything is assembled at Sodemo and then it gets put into the race cars at Triple Eight. I don't believe it is a classic set-up, but it is one that we have come to with the experience and relationship that we have build with our partner and it seems to pay off as I believe we have the strongest engine on the grid.
I guess the main thing in our relationship with Sodemo is transparency. Most of the issues between a race team and an engine builder normally come through a lack of communication. There is a geographical issue and we are based in a different place and a different country to Sodemo, but the key to a successful relationship is to communicate. That is the part that you need to get right.
Click on relevant pic to enlarge [NEW FEATURE]
Start the conversation - Add your comment
Although the administrators and moderators of this website will attempt to keep all objectionable comments off these pages, it is impossible for us to review all messages. All messages express the views of the poster, and neither Crash Media Group nor Crash.Net will be held responsible for the content of any message. We do not vouch for or warrant the accuracy, completeness or usefulness of any message, and are not responsible for the contents of any message. If you find a message objectionable, please contact us and inform us of the problem or use the [report] function next to the offending post. Any message that does not conform with the policy of this service can be edited or removed with immediate effect.