BAR Honda 005 - technical specifications.

Complete technical specifications for the new BAR Honda 005, launched today [Tuesday] at the Circuit de Catalunya, Barcelona, Spain.

Chassis - BAR 005:

Construction: Moulded carbon fibre and honeycomb composite structure that surpasses latest FIA impact and strength regulations.

Front suspension: Wishbone and pushrod-activated torsion springs and rockers, mechanical anti-roll bar.

Rear suspension: Wishbone and pushrod-activated torsion springs and rockers, mechanical anti-roll bar.

Dampers: Koni.

Wheels: BBS forged magnesium.

Front: 325mm wide.

Rear: 360mm wide.

Tyres: Bridgestone Potenza radials.

Brakes: AP Racing.

Front: 2 x 6-piston calipers.

Back: 2 x 6-piston calipers.

Brake discs/pads: Carbon/carbon.

Steering: B?A?R power assisted Rack and Pinion.

Steering wheel: B?A?R carbon fibre construction.

Driver's seat: Anatomically formed carbon composite.

Seat belts: Six-point harness (50mm shoulder straps with H.A.N.S system).

Fuel cell: ATL kevlar-reinforced rubber bladder.

Fuel capacity: 100kg.

Fuel provider: Elf.

Lubricants provider: Nisseki.

Battery: 12v 5Ah lead acid

Instrumentation: B?A?R steering wheel dash display.

Engine - Honda:

Name: Honda RA003E

Displacement: 3.0 litres

Configuration: V10, naturally aspirated.

Cooling system: IMI/Marston Air/oil - air/water heat exchangers

Transmission:

Gearbox: B?A?R - Xtrac 7-speed unit.

Gear selection: Sequential, semi-automatic, hydraulic activation.

Clutch: AP, triple-plate carbon.

Dimensions:

Front track: 1460mm.Rear track: 1420mm.Wheel base: 3140mm.Overall length: 4465mm.Overall height: 950mm.Overall width: 1800mm.